SY55852UKG-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | SY55 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.3V~5.7V |
| Frequency | 2.5GHz |
| Base Part Number | SY55852 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 5.7V |
| Min Supply Voltage | 2.3V |
| Number of Bits | 1 |
| Clock Frequency | 2.5GHz |
| Propagation Delay | 500 ps |
| Quiescent Current | 36mA |
| Turn On Delay Time | 400 ps |
| Current - Quiescent (Iq) | 36mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SY55852UKG-TR Overview
The flip flop is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Differentialas the output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 2.3V~5.7Vvolt supply, it operates as follows. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. FPGAs belonging to the SY55series contain this type of chip. It should not exceed 2.5GHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 36mA quiescent current and is not affected by external forces. This D latch belongs to the family of SY55852. This electronic part is mounted in the way of Surface Mount. It is designed with 10 pins. Its clock edge trigger type is Positive Edge. This flip flop is designed with 1 Bits. This D latch consumes 36mA quiescent current at all. Ideally, the operating temperature should be below 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. The minimal supply voltage is 2.3V. It supports the maximal supply voltage of 5.7V. 2.5GHzis the maximum frequency that can be achieved.
SY55852UKG-TR Features
Tape & Reel (TR) package
SY55 series
10 pins
1 Bits
SY55852UKG-TR Applications
There are a lot of Microchip Technology SY55852UKG-TR Flip Flops applications.
- Computing
- Communications
- ESCC
- High Performance Logic for test systems
- QML qualified product
- Differential Individual
- Supports Live Insertion
- Dynamic threshold performance
- Cold spare funcion
- Reduced system switching noise
