T1014NXE7KQA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 780-FBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Published | 2014 |
| Series | QorIQ T1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 780 |
| ECCN Code | 5A002.A.1 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| JESD-30 Code | S-PBGA-B780 |
| Supply Voltage-Max (Vsup) | 1.03V |
| Supply Voltage-Min (Vsup) | 0.97V |
| Speed | 1GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 133.33MHz |
| Bit Size | 64 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Integrated Cache | YES |
| Ethernet | GbE (8) |
| Number of Cores/Bus Width | 1 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3L, DDR4 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 2.07mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
T1014NXE7KQA Overview
The embedded microprocessor ships overseas conveniently packed in 780-FBGA. This CPU has 1 Core 64-Bit cores and 1 Core 64-Bit bus widths. Be aware of the operating temperature around -40°C~105°C TA. In the QorIQ T1 series, it is found. PowerPC e5500 is the processor core of this CPU. This CPU uses DDR3L, DDR4 RAM controllers. This microprocessor features I2C, MMC/SD, PCIe, SPI, UART interfaces to better serve its users. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. As a whole, there are 780 terminations. The microprocessor should be turned on and run with a voltage supply of 1V volts. In terms of architecture, it is a 64-Bit system. 1.03V is its maximum supply current. With a 64 width external data bus, this CPU has a wide external data bus. The embedded microprocessor has a clock frequency of 133.33MHz.
T1014NXE7KQA Features
PowerPC e5500 Core
64-Bit Structure
T1014NXE7KQA Applications
There are a lot of NXP USA Inc. T1014NXE7KQA Microprocessor applications.
- Robotic prosthetic limbs
- DDC control
- Smart highways (navigation, traffic control, information monitoring and car service)
- Calculators
- Leakage current tester
- Smart instruments
- Teletext terminals
- Radio
- Graphic terminals
- Home video and audio
