T1042NXN7PQB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 780-FBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | QorIQ T1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 780 |
| ECCN Code | 3A991.A.1 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| JESD-30 Code | S-PBGA-B780 |
| Supply Voltage-Max (Vsup) | 1.03V |
| Supply Voltage-Min (Vsup) | 0.97V |
| Speed | 1.4GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 133.3MHz |
| Bit Size | 32 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Ethernet | 1Gbps (5) |
| Number of Cores/Bus Width | 4 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3L, DDR4 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 2.07mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
T1042NXN7PQB Overview
Due to its 780-FBGA, FCBGA packaging, it is convenient to ship overseas. High reliability is achieved using advanced packaging method Tray. A CPU with 4 Core 64-Bit cores and width 4 Core 64-Bit busses is used. K-40°C~105°C TAw what the operating temperature is around -40°C~105°C TA. It comes from the QorIQ T1 series. A PowerPC e5500 processor is present in this CPU. DDR3L, DDR4 RAM controllers are used by this CPU. This microprocessor is equipped with an interface of I2C, MMC/SD, PCIe, SPI, UART. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Total terminations are 780. When the voltage supply is 1V, the cpu microprocessor should be powered on and run. There are 32 bits in its architecture. A maximum supply current of 1.03V can be achieved by the microprocessor. The CPU's external data bus width is 64. A clock frequency of 133.3MHz is used by the CPU microprocessor.
T1042NXN7PQB Features
PowerPC e5500 Core
32-Bit Structure
T1042NXN7PQB Applications
There are a lot of NXP USA Inc. T1042NXN7PQB Microprocessor applications.
- Dialysis machines (performs function of liver)
- DCS control intelligent sensor
- Nintendo
- Food and beverage
- Agriculture, transportation field
- Calculators
- Television
- Smart instruments
- Equipment control
- Smartphone
