T186E
| Parameters | |
|---|---|
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
| Number of Pins | 2 |
| Housing Material | Polyester |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Cable Length | 78.74 2m |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 1.5 ms |
T186E Overview
In order to work reliably, the photoelectric sensor should be set to -40°C~70°C. In order for these electronic components to work, they should be given 10V~30V voltage. Photoelectric sensors have an ideal response time of 1.5 ms. To make the photoelectric sensor work properly, 2 pins must be connected. For a photoelectric sensor to work, the output current should be 150mA. The photoelectric sensor can withstand a maximum voltage of 30V in a DC circuit without sustaining damage. As low a voltage as possible, such as 10V, can be used by this photoelectric sensor.
T186E Features
Sensing Distance: 787.402 (20m)
2 pins
Response Time: 1.5 ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T186E Applications
There are a lot of Banner Engineering Corporation T186E Photoelectric Sensors applications.
- Checking objects on production lines or conveyors
- Automatic doors
- Detecting colours
- Automotive industry
- Mechanical engineering
- Material handling
- Pharmaceutical industry
- Zone scanners
- detect objects
- Measuring distance
