T18SN6LPQ
| Parameters | |
|---|---|
| Mount | Plug-In |
| Number of Pins | 4 |
| Operating Temperature | -40°C~70°C |
| Published | 2008 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP69K |
| Output Configuration | NPN - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 78.740 (2m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red (680nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
T18SN6LPQ Overview
In order for the photoelectric sensor to work reliably, it should be set to -40°C~70°C degrees Celsius. For these electronic components to function, a circuit or system should have 0 volts. Photoelectric sensors have an ideal response time of 3ms. This photoelectric sensor can only function properly if the 4 pins are connected. Photoelectric sensors need 150mA at their outputs to work. There is no damage to the photoelectric sensor if the maximum voltage of 30V is applied to the DC circuit. Ideally, this photoelectric sensor should operate at a low voltage, such as 0V.
T18SN6LPQ Features
Sensing Distance: 78.740 (2m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SN6LPQ Applications
There are a lot of Banner Engineering Corporation T18SN6LPQ Photoelectric Sensors applications.
- Entrance and gate
- Pharmaceutical industry
- Detecting colours
- Measuring distance
- Checking objects on production lines or conveyors
- Material handling
- Contrast sensors
- Automatic doors
- Automotive industry
- Counting small objects
