T18SN6RQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Polycarbonate |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | NPN - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
T18SN6RQ Overview
Photoelectric sensors should be set at -40°C~70°C for reliable performance. For these electronic components to work, the voltage should be provided by 10V~30V. Photoelectric sensors are considered to have an optimal response time of 3ms. 4 pins must be connected to the photoelectric sensor for it to function correctly. Photoelectric sensors must have an output current of 150mA in order to operate. It is possible to apply the maximum voltage of 30V to the photoelectric sensor without damaging it in a DC circuit. There are some photoelectric sensors that can work with low voltages, such as 10V.
T18SN6RQ Features
Sensing Distance: 787.402 (20m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SN6RQ Applications
There are a lot of Banner Engineering Corporation T18SN6RQ Photoelectric Sensors applications.
- Measuring distance
- Entrance and gate
- Luminescence sensors
- Mechanical engineering
- Automatic doors
- Automotive industry
- Detecting colours
- Checking objects on production lines or conveyors
- Material handling
- Contrast sensors
