T18SP6DQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Body Material | PBT, Polyester |
| Operating Temperature | -40°C~70°C |
| Published | 2008 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 19.685 (500mm) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 41.7mm |
| Width | 30mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
T18SP6DQ Overview
To make sure the photoelectric sensor works, set its temperature to zero. If you want these electronic components to work, you need to apply 10V~30V. A photoelectric sensor with a response time of 3ms is considered to be ideal. The photoelectric sensor must be connected to 4 pins in order to function properly. For a photoelectric sensor to work, the output current should be 150mA. Photoelectric sensors can be damaged by voltages up to 30V in DC circuits. Photoelectric sensors work at as low a voltage as possible, for example 10V.
T18SP6DQ Features
Sensing Distance: 19.685 (500mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SP6DQ Applications
There are a lot of Banner Engineering Corporation T18SP6DQ Photoelectric Sensors applications.
- Passive infrared sensors
- Material handling
- Logistics and materials handling
- Detecting colours
- Contrast sensors
- detect objects
- Measuring distance
- Checking objects on production lines or conveyors
- Entrance and gate
- Automotive industry
