T18SP6FF100Q
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Polyester |
| Operating Temperature | -40°C~70°C |
| Published | 2008 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Background Suppression |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
T18SP6FF100Q Overview
For reliable performance, set the photoelectric sensor to -40°C~70°C. For these electronic components to function, a circuit or system should have 0 volts. An ideal response time for photoelectric sensors is 3ms. You've got to connect the 4 pins to the photoelectric sensor for it to work. A photoelectric sensor must have a current at the output of 150mA in order to function. Photoelectric sensors can withstand voltages up to 30V in DC circuits. It is possible to operate this photoelectric sensor at a voltage as low as possible, for example at zero volts.
T18SP6FF100Q Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SP6FF100Q Applications
There are a lot of Banner Engineering Corporation T18SP6FF100Q Photoelectric Sensors applications.
- Detecting colours
- Pharmaceutical industry
- Mechanical engineering
- Automatic doors
- detect objects
- Counting small objects
- Logistics and materials handling
- Material handling
- Entrance and gate
- Monitoring bigger areas for objects with light grids
