T18SP6LPQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 78.740 (2m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red (680nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
T18SP6LPQ Overview
Ensure reliable performance by setting the photoelectric sensor's temperature to -40°C~70°C. In order for these electronic components to work, their voltage must be set to 10V~30V. A photoelectric sensor should have a response time of 3ms. To make the photoelectric sensor work, you have to connect the 4 pins. Photoelectric sensors need an output current of 150mA in order to operate. The maximum voltage of 30V in DC circuit can be applied to the photoelectric sensor without damage. Photoelectric sensors can operate at low voltages, such as 10V.
T18SP6LPQ Features
Sensing Distance: 78.740 (2m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SP6LPQ Applications
There are a lot of Banner Engineering Corporation T18SP6LPQ Photoelectric Sensors applications.
- Detecting colours
- Material handling
- Entrance and gate
- Zone scanners
- detect objects
- Counting small objects
- Measuring distance
- Checking objects on production lines or conveyors
- Logistics and materials handling
- Contrast sensors
