T355A105K035AT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Disc |
| Surface Mount | NO |
| Terminal Shape | WIRE |
| Number of Pins | 2 |
| Dielectric Material | Tantalum |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Published | 2004 |
| Series | T355, UltraDip II |
| Size / Dimension | 0.177Dia 4.50mm |
| Tolerance | ±10% |
| JESD-609 Code | e3 |
| Feature | General Purpose |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| Type | Conformal Coated |
| Capacitance | 1μF |
| Voltage - Rated DC | 35V |
| Packing Method | TR |
| Depth | 4.5mm |
| Lead Pitch | 3.18mm |
| ESR (Equivalent Series Resistance) | 8Ohm @ 100kHz |
| Polarity | Polar |
| Lead Spacing | 0.125 3.18mm |
| Lead Diameter | 500 μm |
| Leakage Current | 500nA |
| Tan Delta | 0.03 |
| Dissipation Factor | 3 % |
| Manufacturer Size Code | A |
| Diameter | 4.5mm |
| Height | 8.6mm |
| Height Seated (Max) | 0.339 8.60mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
T355A105K035AT Overview
In a simple electronic circuit consisting of an ideal (perfect) capacitor and a resistor, equivalent series resistance (ESR), also known as internal resistance, represents the loss of useful energy.This capacitor has a leakage current of 500nA.Whenever AC is applied through a capacitor, the dissipation factor is 3 %.The Tan Delta test of insulating oil determines its quality by measuring its electrical dielectric properties.
T355A105K035AT Features
a leakage current of 500nA in this capacitor
the dissipation factor is 3 %
its tan delta is 0.03
T355A105K035AT Applications
There are a lot of KEMET T355A105K035AT applications of tantalum capacitors.
- Consumer
- Airbag systems
- General purpose
- ABS
- Avionics / military / space
- Industrial control units
- Avionics,
- Telecom infrastructure
- Automotive ECU
- General low power DC/DC and LDO
