T4241NSN7QTB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1932-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Published | 2002 |
| Series | QorIQ T4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.025V |
| Terminal Pitch | 1mm |
| JESD-30 Code | S-PBGA-B1932 |
| Supply Voltage-Max (Vsup) | 1.055V |
| Supply Voltage-Min (Vsup) | 0.995V |
| Speed | 1.667GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e6500 |
| Clock Frequency | 133.3MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V |
| Ethernet | 1Gbps (13), 10Gbps (2) |
| Number of Cores/Bus Width | 24 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, RapidIO, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.33mm |
| Length | 45mm |
| RoHS Status | ROHS3 Compliant |
T4241NSN7QTB Overview
The microprocessor is convenient for international shipping since it is packaged in 1932-BBGA, FCBGA. CPUs have 24 Core 64-Bit cores/bus width. Understand how the operating temperature around 0°C~105°C TA is determined. In the series QorIQ T4, it is found. The CPU is cored with a PowerPC e6500 processor. A CPU with this architecture uses DDR3, DDR3L RAM controllers. The microprocessor features interfaces I2C, MMC/SD, PCIe, RapidIO, SPI, UART for better service. The CPU runs I/O at 1.8V 2.5V. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. In the case of a 1.025V voltage supply, the embedded microprocessor should be turned on and run. The maximum supply current is 1.055V. There is a wide width of 64 on the external data bus of this CPU. CPU microprocessors with clock frequencies of 133.3MHz operate.
T4241NSN7QTB Features
PowerPC e6500 Core
T4241NSN7QTB Applications
There are a lot of NXP USA Inc. T4241NSN7QTB Microprocessor applications.
- Network communication, mobile communication field
- Smoke alarms
- Automobile
- Industrial control field
- Accu-check
- Projector
- Projectors
- Ipod
- Hearing aids
- Computer/laptop
