T4241NXN7QTB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1932-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Published | 2002 |
| Series | QorIQ T4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 3A991.A.1 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.025V |
| Terminal Pitch | 1mm |
| JESD-30 Code | S-PBGA-B1932 |
| Supply Voltage-Max (Vsup) | 1.055V |
| Supply Voltage-Min (Vsup) | 0.995V |
| Speed | 1.667GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e6500 |
| Clock Frequency | 133.3MHz |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V |
| Ethernet | 1Gbps (13), 10Gbps (2) |
| Number of Cores/Bus Width | 24 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3, DDR3L |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, RapidIO, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 3.33mm |
| Length | 45mm |
| RoHS Status | ROHS3 Compliant |
T4241NXN7QTB Overview
The embedded microprocessor has been packed in 1932-BBGA, FCBGA for convenient overseas shipping. There are 24 Core 64-Bit cores/bus width on the CPU. It is important to understand the operating temperature around -40°C~105°C TA. The QorIQ T4 series contains it. With a core count of PowerPC e6500, this CPU is multicore. A CPU with this architecture uses DDR3, DDR3L RAM controllers. This microprocessor features I2C, MMC/SD, PCIe, RapidIO, SPI, UART interfaces to better serve its users. I/O is run at 1.8V 2.5V on this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. With a 1.025V voltage supply, the part should be turned on and run. The maximum supply current of this microprocessor is 1.055V. The CPU's external data bus width is 64. CPU microprocessors with a clock frequency of 133.3MHz are used.
T4241NXN7QTB Features
PowerPC e6500 Core
T4241NXN7QTB Applications
There are a lot of NXP USA Inc. T4241NXN7QTB Microprocessor applications.
- Switches
- Day to day life field
- Gas monitoring systems
- Microwave ovens
- Walkie talkies
- Laminators
- Teletext terminals
- Copiers
- Virtual reality VR robots
- Scanners
