banner_page

T4241NXN7TTB

1mm PowerPC e6500 Microprocessor QorIQ T4 Series 1.025V 1932-BBGA, FCBGA


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-T4241NXN7TTB
  • Package: 1932-BBGA, FCBGA
  • Datasheet: PDF
  • Stock: 507
  • Description: 1mm PowerPC e6500 Microprocessor QorIQ T4 Series 1.025V 1932-BBGA, FCBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Package / Case 1932-BBGA, FCBGA
Surface Mount YES
Operating Temperature -40°C~105°C TA
Published 2002
Series QorIQ T4
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code 3A991.A.1
HTS Code 8542.31.00.01
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 250
Supply Voltage 1.025V
Terminal Pitch 1mm
JESD-30 Code S-PBGA-B1932
Supply Voltage-Max (Vsup) 1.055V
Supply Voltage-Min (Vsup) 0.995V
Speed 1.8GHz
uPs/uCs/Peripheral ICs Type MICROPROCESSOR, RISC
Core Processor PowerPC e6500
Clock Frequency 133.3MHz
Address Bus Width 16
Boundary Scan YES
Low Power Mode YES
External Data Bus Width 64
Format FIXED POINT
Integrated Cache YES
Voltage - I/O 1.8V 2.5V
Ethernet 1Gbps (13), 10Gbps (2)
Number of Cores/Bus Width 24 Core 64-Bit
Graphics Acceleration No
RAM Controllers DDR3, DDR3L
USB USB 2.0 + PHY (2)
Additional Interfaces I2C, MMC/SD, PCIe, RapidIO, SPI, UART
Security Features Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage
SATA SATA 3Gbps (2)
Height Seated (Max) 3.33mm
Length 45mm
RoHS Status ROHS3 Compliant

T4241NXN7TTB Overview


Packed in 1932-BBGA, FCBGA, the microprocessor is convenient for shipping overseas. This CPU has 24 Core 64-Bit cores and 24 Core 64-Bit bus widths. Identify the operating temperature around -40°C~105°C TA. QorIQ T4 is its series number. PowerPC e6500 processors are embedded in this CPU. There are DDR3, DDR3L RAM controllers used by this CPU. The microprocessor features interfaces I2C, MMC/SD, PCIe, RapidIO, SPI, UART for better service. There is 1.8V 2.5V I/O running on this CPU. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. With a 1.025V voltage supply, the part should be turned on and run. A maximum supply current of 1.055V is available. With a 64 external data bus width, this CPU has a wide data bus. There is 133.3MHz clock frequency for the microprocessor.

T4241NXN7TTB Features


PowerPC e6500 Core

T4241NXN7TTB Applications


There are a lot of NXP USA Inc. T4241NXN7TTB Microprocessor applications.

  • Measurement and control field
  • Embedded gateways
  • Accu-check
  • Kindle
  • Set-top boxes
  • Calculators
  • Industrial instrumentation devices
  • DDC control
  • Hand-held metering systems
  • Keyboards

Write a review

Note: HTML is not translated!
    Bad           Good