T6817-TKQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.5Ohm |
| Terminal Finish | MATTE TIN |
| Applications | Bulbs, DC Motors, Resistors |
| HTS Code | 8542.31.00.01 |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | T6817 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Max Output Current | 950mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Output Current per Channel | 600mA |
| Voltage - Load | 5.5V~40V |
| Fault Protection | ESD, Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 1.5 Ω LS (Max), 2 Ω HS (Max) |
| Load Type | Inductive, Capacitive, Resistive |
| Height Seated (Max) | 1.45mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
T6817-TKQ Overview
H bridge is packaged using Tape & Reel (TR).In order to save costs, H bridge is included in the 20-TSSOP (0.173, 4.40mm Width) package.In addbridge driverion, 4.5V~5.5V can be used to improve reliabilbridge drivery.In Surface Mount, H bridge circuit is mounted.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many applications are Bulbs, DC Motors, Resistors.On the PCB H gate is mounted using Surface Mount.Status Flag is another of full bridges specific characteristics.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 20 terminations.20 pins is used as pronged contacts as H bridge ic of a signal interface.In addition to the T6817 H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.The H bridge is powered by a voltage supply of 5V.As its analog IC type, H bridge circuit has been incorporated with BRUSH DC MOTOR CONTROLLER.An ambient temperature of 950mA determines the maximum load current that a power supply can deliver.It has a 6 output.
T6817-TKQ Features
Available in 20-TSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : T6817
T6817-TKQ Applications
There are a lot of Microchip Technology T6817-TKQ Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Pumps
- Voltage Regulators
- Workstations
- DC-DC Converters
- Non-V-Core
- VTR
- Notebook Computers
- Compact Blade Servers
- V-Core
- Quad DC motor
