T6819-TBS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5.6V |
| Max Supply Current | 6mA |
| Turn On Delay Time | 20 μs |
| Output Current per Channel | 1.5A |
| Turn-Off Delay Time | 20 μs |
| Interface IC Type | SIPO BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 6 |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Length | 9.925mm |
| Width | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
T6819-TBS Overview
The SOIC package includes it.Hot-swappable device terminates wHot-swappable deviceh 16 in total.A device's terminal position is DUAL.Total number of pins is 16.High efficiency can be achieved by using 5V as supply voltage.16 pins are used to operate the system.Despite its self-contained nature, Peripheral Drivers is a very compact device.There is a Surface Mount-axis orientation to it.For stable operation, 150°C°C is the maximum operating temperature.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.As a default, it's set to output 6.40VV is the maximum supply voltage that it can handle.With 5.6VV, it can work with the lowest supply voltage possible.This results in a maximum output current of 2A, which meets the operation criteria.Hot Swap requires a maximum current of 6mA to operate.500mOhm-resistance is one of the characteristics of the device.
T6819-TBS Features
The terminal position of 16
T6819-TBS Applications
There are a lot of Atmel (Microchip Technology) T6819-TBS hot swap controllers applications.
- Industrial application
- Short-circuit protection in real time
- Base station power distribution system
- Redundant-array-of-independent-disk (RAID) storage
- Inrush current control
- Redundant negative voltage supplies
- High power circuit board
- Active current limit
- Automatic restart after load failure
- Remote access server
