TA80C186XL-20
| Parameters | |
|---|---|
| Mount | Through Hole |
| Number of Pins | 68 |
| Packaging | Bulk |
| Pbfree Code | no |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS; NUMERIC COPROCESSOR INTERFACE |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Bit Size | 16 |
| Access Time | 20 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Height Seated (Max) | 5.21mm |
| Length | 29.464mm |
| Width | 29.464mm |
| RoHS Status | RoHS Compliant |
TA80C186XL-20 Overview
Using advanced packaging techniques Bulk, high reliability is ensured. uPs/uCs/Peripheral ICs type is MICROPROCESSOR. Total terminations are 68. Using a 5V voltage supply, you should be able to operate the cpu microprocessor. This microprocessor has an architecture of 16 bits. CPUs operate at 20MHz Hz. Please refer to the datasheets for 68 pins functions. The external data bus width of this CPU is 16. Temperatures above 85°C should not allow the embedded microprocessor to operate. 68 pins are injected into the part body. This CPU is widely used in a variety of applications with its Through Hole mounting. Micro processors can be used from 5V. There is 5V voltage at the CPU core. Users should not supply the embedded microprocessor with voltages higher than 5.5V in normalcircumstances. There should be 4.5V voltage applied to the CPU microprocessor below 4.5V. The microprocessor has additional features, such as DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS; NUMERIC COPROCESSOR INTERFACE.
TA80C186XL-20 Features
16-Bit Structure
TA80C186XL-20 Applications
There are a lot of Rochester Electronics TA80C186XL-20 Microprocessor applications.
- Data acquisition and control
- Process control devices
- Auto-breaking system
- Virtual reality VR robots
- Walkie talkies
- Switches
- Hard drives
- Telephone sets
- Oil and gas
- X-ray
