TA80C188XL20
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Frequency (Max) | 20MHz |
| Access Time | 20 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 5 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 5.21mm |
| Length | 29.464mm |
| Width | 29.464mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Number of Pins | 68 |
| Packaging | Bulk |
| Published | 1996 |
| Part Status | Discontinued |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
TA80C188XL20 Overview
Advanced packaging method Bulk is used to provide high reliability. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. Overall, there are 68 terminations. When the voltage supply is 5V, the cpu microprocessor should be powered on and run. The architecture of the microprocessor is 16-bit. A CPU operates at a frequency of 20MHz. To learn about the functions of the pins 68 please refer to their datasheets. The cpu microprocessor Microprocessors is typical. There is a wide width of 8 on the external data bus of this CPU. An environment with a temperature higher than 85°C is not recommended for the embedded microprocessor. There are 68 pins injected into the embedded microprocessor body. In many applications, this CPU is mounted with a Through Hole bus. In this case, the CPU should reach 20MHz as its top frequency. The micro processor can function from 5V. The datasheet specifies that this CPU microprocessor requires 5V power supply. There is 5V voltage at the CPU core. Voltage can't exceed 90mA to the CPU. A voltage greater than 5.5V should not normally be applied to the embedded microprocessor. The lowest voltage fed to the CPU microprocessor should be 4.5V. Be sure to check out the additional features of the microprocessor, including: DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS. In order to handle hardware interrupts, there are 5 external interrupt terminations. Programs the DMA (Direct Memory Access) process using Channel 2.
TA80C188XL20 Features
16-Bit Structure
TA80C188XL20 Applications
There are a lot of Intel TA80C188XL20 Microprocessor applications.
- Christmas lights
- Projector
- Instrumentation and process control field
- Network communication, mobile communication field
- Smoke alarms
- Safety field
- Scanners
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Hearing aids
- Measuring revolving objects
