TAS5601DCA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 236.888615mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Digital PWM Inputs, Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5.5W |
| Technology | CMOS |
| Voltage - Supply | 10V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TAS5601 |
| Pin Count | 56 |
| Output Type | 2-Channel (Stereo) or 4-Channel (Quad) |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 10V |
| Number of Channels | 4 |
| Nominal Supply Current | 11mA |
| Power Dissipation | 5.5W |
| Output Power | 20W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Max Output Power | 20W |
| Dual Supply Voltage | 24V |
| Max Output Power x Channels @ Load | 20W x 2 @ 8 Ω; 19W x 4 @ 4 Ω |
| Load Impedance | 4Ohm |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5601DCA Overview
Amp parts is embedded in the 56-TFSOP (0.240, 6.10mm Width) Exposed Pad package.Amp parts is recommended that the chip be packaged in a Tube case.The 56 termination refers to terminating transmission lines with devices that match their characteristic impedance.2-Channel (Stereo) or 4-Channel (Quad) is the output configured for it.An electrical device of type Class D is involved.The 56 pins are pronged contacts which are part of a signal interface in a computer or other communication device.In this case, the electronic part is mounted in the way of Surface Mount .This electrical device is powered by 10V~26V volts.4 channels are provided by the device.When operating, it is possible to ensure Digital PWM Inputs, Short-Circuit and Thermal Protection .A maximum operating temperature of -40°C~85°C TA should be maintained.In addition, it is equipped with 56 pins.Audio/Video Amplifiers incorporates this part.Amp parts is a member of the TAS5601 family.The maximal Output Power of this electronic part is 20W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 10V .Vsup reaches 26V at the maximum.Electronic parts with Single supply types are available.
TAS5601DCA Features
56-TFSOP (0.240, 6.10mm Width) Exposed Pad package
56 pin count
TAS5601 family
20W kWh per hour
TAS5601DCA Applications
There are a lot of Texas Instruments TAS5601DCA audio amplifiers applications.
- Oscilloscopes
- Video and image computer boards
- Radar
- Displayers for aircraft and air transportation control systems
- Semiconductor detectors
- Power generator
- High gain DC amplifier
- Fission chambers
- Automation control systems
- Test and measurement instruments
