TAS5611PHD
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | PurePath™ HD |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 5A (24 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.3W |
| Voltage - Supply | 16V~34.1V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Base Part Number | TAS5611 |
| Pin Count | 64 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 2 |
| Nominal Supply Current | 20mA |
| Output Power | 125W |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 250W |
| Max Output Power x Channels @ Load | 250W x 1 @ 2 Ω; 165W x 2 @ 3 Ω |
| Load Impedance | 4Ohm |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5611PHD Overview
A device has been embedded in 64-TQFP Exposed Pad .Amp parts is recommended that the chip be packaged in a Tray case.The 64 termination refers to terminating transmission lines with devices that match their characteristic impedance.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) or 2-Channel (Stereo) as the output.This electrical device has the type Class D .Computers and other communication devices feature 64 pins, which are pronged contacts.Amp parts is mounted in the way of Surface Mount .This electrical device is powered by 16V~34.1V volts.2 channels are present on the device.Amp parts is possible to operate wAmp partsh Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .There should be no temperature increase above 0°C~70°C TA .The device is equipped with a total of 64 pins.Amp parts is a member of the family TAS5611 .The electronic component is mounted in the way of Surface Mount .A maximum output power of 250W kWh per hour can be achieved with this electronic part.To ensure normal operation, the supply voltage (Vsup) must be maintained above 10.8V .This item is part of the PurePath? HD series.
TAS5611PHD Features
64-TQFP Exposed Pad package
64 pin count
TAS5611 family
250W kWh per hour
PurePath? HD series
TAS5611PHD Applications
There are a lot of Texas Instruments TAS5611PHD audio amplifiers applications.
- Television broadcasting equipment
- Band-pass filter
- Semiconductor detectors
- Communication
- Information processing
- Medical imaging
- Weak signal detection
- High-frequency data acquisition systems
- Comparator
- Oscilloscopes
