TAS5630BDKD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 44-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | PurePath™ HD |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Voltage - Supply | 25V~52.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TAS5630 |
| Pin Count | 44 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Operating Supply Voltage | 52.5V |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | 1250V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 2 |
| Nominal Supply Current | 22.5mA |
| Quiescent Current | 13.3mA |
| Output Power | 300W |
| Voltage Gain | 23dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 480W |
| Max Output Power x Channels @ Load | 480W x 1 @ 2 Ω; 300W x 2 @ 4 Ω |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5630BDKD Overview
This package is embedded in 44-BSSOP (0.433, 11.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in a Tube case.As a consequence, there are 44 terminations, which involve ending a transmission line with a device matching the characteristic impedance of the line.The output it is configured with uses 1-Channel (Mono) or 2-Channel (Stereo) .The type of this electrical device is Class D .In a computer or other communication device, there are two pronged contacts called 44 pins.There is an electronic part mounted in the way of Surface Mount .Amp parts is powered by a voltage of 25V~52.5V volts.There are 2 channels available on the device.When operating, Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.The operating temperature should not exceed 0°C~70°C TA °C.The number of pins is 44 .This chip belongs to Audio/Video Amplifiers .Amp parts belongs to the TAS5630 family.An electronic part such as this has a maximum output power of 480W kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 10.8V .Vsup reaches 13.2V at the maximum.The device is powered by a voltage of 1250V volts.This item is part of the PurePath? HD series.Amp parts consumes 13.3mA of quiescent current wAmp partshout being affected by external factors.
TAS5630BDKD Features
44-BSSOP (0.433, 11.00mm Width) Exposed Pad package
44 pin count
TAS5630 family
480W kWh per hour
PurePath? HD series
TAS5630BDKD Applications
There are a lot of Texas Instruments TAS5630BDKD audio amplifiers applications.
- Portable electronic products powered by batteries
- Signal amplification
- ECG equipment
- Proportional operation circuits
- single/dual op amp sum and difference circuits
- Power control
- Signal operation
- Information processing
- Multiplication and division circuits
- Band-pass filter
