TAS5631BDKD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 44-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | PurePath™ HD |
| JESD-609 Code | e4 |
| Feature | Depop, Digital Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 3W |
| Voltage - Supply | 25V~52.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TAS5631 |
| Pin Count | 44 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | 1250V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 2 |
| Nominal Supply Current | 22.5mA |
| Output Power | 400W |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 600W |
| Max Output Power x Channels @ Load | 600W x 1 @ 2 Ω; 300W x 2 @ 4 Ω |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5631BDKD Overview
44-BSSOP (0.433, 11.00mm Width) Exposed Pad contains an embedded device.The chip is recommended to be packaged in Tube case. The 44 termination refers to terminating transmission lines with devices that match their characteristic impedance.In the configuration, 1-Channel (Mono) or 2-Channel (Stereo) is used as the output.In terms of electrical devices, it belongs to the type Class D .In a computer or other communications device, 44 pins are pronged contacts.Electronic parts are mounted in the way of Surface Mount .There is 25V~52.5V voltage supply to this electrical device.The number of channels is growing strong/weak: 2 .Amp parts is possible to operate wAmp partsh Depop, Digital Inputs, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed 0°C~70°C TA °C.The device is equipped with 44 pins.Audio/Video Amplifiers contains it.Amp parts belongs to TAS5631 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 600W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 10.8V to ensure proper operation of the device.During this time, the maximum supply voltage (Vsup) reaches 13.2V volts.This device runs on a power supply of 1250V volts.Amp parts is a part of the PurePath? HD series.
TAS5631BDKD Features
44-BSSOP (0.433, 11.00mm Width) Exposed Pad package
44 pin count
TAS5631 family
600W kWh per hour
PurePath? HD series
TAS5631BDKD Applications
There are a lot of Texas Instruments TAS5631BDKD audio amplifiers applications.
- ECG equipment
- High-frequency data acquisition systems
- Information processing
- Weak signal detection
- Displayers for aircraft and air transportation control systems
- High/low-pass filter circuit
- Proportional operation circuits
- Vehicle electronics
- Fission chambers
- Portable electronic products powered by batteries
