TAS5701PAP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Depop, Digital Inputs, I2S, Mute, PWM, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TAS5701 |
| Pin Count | 64 |
| Output Type | 2-Channel (Stereo) |
| Number of Channels | 3 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 600mW |
| Max Supply Current | 10mA |
| Output Power | 20W |
| Supply Type | Quint |
| Bandwidth | 20 kHz |
| Max Output Power | 20W |
| Dual Supply Voltage | 18V |
| Min Supply Voltage (DC) | 3V |
| Max Output Power x Channels @ Load | 20W x 2 @ 8 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 8Ohm |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5701PAP Overview
The device is embedded in 64-PowerTQFP .Amp parts is packaged in the way of Tray .There are 64 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured to produce 2-Channel (Stereo) as Amp partss output.Class D is the type of this electrical device.The computer or other communication device has 64 pins, which are pronged contacts.Amp parts is mounted in the way of Surface Mount .There is 10.8V~13.2V supply voltage for this electrical device.Amp parts is equipped wAmp partsh 3 channels.Ensure that Depop, Digital Inputs, I2S, Mute, PWM, Short-Circuit and Thermal Protection, Shutdown, Volume Control is maintained when operating.During operation, the temperature should not exceed 0°C~85°C TA .The device is equipped with 64 pins.Audio/Video Amplifiers incorporates this part.Amp parts is part of the TAS5701 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 20W kWh per hour.In this electronic part, the supply type is Quint .
TAS5701PAP Features
64-PowerTQFP package
64 pin count
TAS5701 family
20W kWh per hour
TAS5701PAP Applications
There are a lot of Texas Instruments TAS5701PAP audio amplifiers applications.
- Signal operation
- High/low-pass filter circuit
- Weak signal detection
- Communication
- Automotive sensors
- single/dual op amp sum and difference circuits
- Active probe
- Scintillation detectors
- Broadcasting
- Test equipment
