TAS5706BPAP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.89W |
| Voltage - Supply | 10V~26V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TAS5706 |
| Pin Count | 64 |
| Output Type | 2-Channel (Stereo) or 4-Channel (Quad) |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.318V |
| Number of Channels | 2 |
| Nominal Supply Current | 80mA |
| Power Dissipation | 2.89W |
| Max Supply Current | 80mA |
| Output Power | 20.6W |
| Supply Type | Dual |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Max Output Power | 20.6W |
| Dual Supply Voltage | 24V |
| Min Supply Voltage (DC) | 3V |
| Max Output Power x Channels @ Load | 20.6W x 2 @ 8 Ω |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5706BPAP Overview
The device is embedded in 64-PowerTQFP .This device is packaged in the way of Tray .64 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts is configured to produce 2-Channel (Stereo) or 4-Channel (Quad) as Amp partss output.In this case, it is an electrical device of type Class D .Computers and other communication devices feature 64 pins, which are pronged contacts.Amp parts is mounted in the way of Surface Mount .Amp parts is powered by a voltage of 10V~26V volts.2 channels are provided by the device.When operating, it is possible to ensure Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control .No temperature higher than 0°C~85°C TA should be used for operations.The device is equipped with 64 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is a member of the TAS5706 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 20.6W kWh per hour.The maximum supply voltage (Vsup) is reached at 3.6V .Amp parts is a Dual supply type.Amp parts operates from a 3.318V power supply.
TAS5706BPAP Features
64-PowerTQFP package
64 pin count
TAS5706 family
20.6W kWh per hour
TAS5706BPAP Applications
There are a lot of Texas Instruments TAS5706BPAP audio amplifiers applications.
- Logarithmic and exponential operation circuits
- single/dual op amp sum and difference circuits
- Portable electronic products powered by batteries
- Signal operation
- High gain DC amplifier
- Communication device
- Fast A/D and D/A converters, video amplifiers
- Test equipment
- Power control
- Signal filtering
