TAS5731PHP
| Parameters | |
|---|---|
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 8V~21V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TAS5731 |
| Pin Count | 48 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Operating Supply Voltage | 21V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 20mA |
| Output Power | 20W |
| Bandwidth | 20 kHz |
| Max Output Power | 41.5W |
| Max Output Power x Channels @ Load | 41.5W x 1 @ 4 Ω; 20.9W x 2 @ 8 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 8Ohm |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | 0°C~85°C TA |
TAS5731PHP Overview
The device is embedded in 48-PowerTQFP .Amp parts is recommended that the chip be packaged in the case Tray .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 48 termination.1-Channel (Mono) or 2-Channel (Stereo) is the output configured for it.Amp parts is an electrical device of type Class D .There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. There is an electronic part mounted in the way of Surface Mount .This electrical device is powered by 8V~21V volts.The chip is equipped with 2 channels.Operation can be ensured by Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Volume Control .The operating temperature should not exceed 0°C~85°C TA °C.Amp parts is equipped wAmp partsh 48 pin count.This part is included in Audio/Video Amplifiers .This item belongs to the family of TAS5731 .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 41.5W kWh per hour.The supply voltage (Vsup) should be kept above 3V for normal operation.During this time, the maximum supply voltage (Vsup) reaches 3.6V volts.As a result, it operates on a 3.3V volt power supply.
TAS5731PHP Features
48-PowerTQFP package
48 pin count
TAS5731 family
41.5W kWh per hour
TAS5731PHP Applications
There are a lot of Texas Instruments TAS5731PHP audio amplifiers applications.
- Weak signal detection
- Semiconductor detectors
- Signal operation
- Test and measurement instruments
- Proportional counter tubes
- Video conversion and routing
- Information processing
- Broadcasting
- Band-stop filter
- Multiplication and division circuits
