TB5D2HDW
| Parameters | |
|---|---|
| Terminal Pitch | 1.27mm |
| Base Part Number | TB5D2 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Interface Standard | GENERAL PURPOSE |
| Number of Drivers | 4 |
| ESD Protection | Yes |
| Transmit Delay-Max | 3.5 ns |
| Supply Voltage1-Nom | 3.3V |
| High Level Input Current-Max | 0.0001A |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 401.089053mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | 5A991.B.1 |
| Type | Driver |
| Additional Feature | ALSO OPERATES WITH 5V SUPPLY |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
TB5D2HDW Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.295, 7.50mm Width) package.Tube package is used to mount this receiver.Since this part is a Driver can transceiver, a number of solutions have been able to utiliDrivere it for various purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.Power supply for this differential driver is 3V~5.5V.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.Wide receiver has 16 terminations built in for driving or receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.As the base part number TB5D2 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.Wide receiver with enhanced power dissipation control, 16-pin.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.This electronic part can have?up to 4 eligible drivers on the field at once.?ICs with ALSO OPERATES WITH 5V SUPPLY functions also improve the overall stability and accuracy of signal management.When the input current reaches or exceeds 40mA, this can transceiver could have mal-functions.
TB5D2HDW Features
Tube package
16 pin count
16 pins
TB5D2HDW Applications
There are a lot of Texas Instruments TB5D2HDW Drivers/Receivers/Transceivers applications.
- LAN, SAN, WAN (local, storage, work area networks)
- Datacom networking applications
- Fiber distributed data interface (FDDI)
- Vehicle
- Metro access rings
- Wireless modems
- Wireless access points
- Laser diode bonding
- Notebook
- Fiber-to-the-desktop
