TB5T1D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 148.409754mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TB5T1 |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 40mA |
| Differential Output | YES |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Interface Standard | GENERAL PURPOSE |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 5.5 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Out Swing-Min | 0.7 V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TB5T1D Overview
With the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.A power supply of 4.5V~5.5V is used by this differential driver.As many as 2/2 receivers/drivers are eligible for use on this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.An operating voltage range of 5V is suitable for this line driver ic.This wide receiver has 16 terminations for driving and receiving data signals.A package consisting of 16 market standard pinouts is provided with this integrated circuit.For more variants of this part, try searching with the base part number TB5T1, which indicates the product type, temperature, package, etc.A 16-pin driver IC with enhanced power dissipation control is featured here.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.This IC implements 1 transceivers overall.Embedded 2 drivers are included on the integrator circuit.
TB5T1D Features
Tube package
16 pin count
16 pins
5V power supply
TB5T1D Applications
There are a lot of Texas Instruments TB5T1D Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Wireless communication
- Tuner
- Switching system
- Wired telephone
- Carrier phase observations
- Laser diode bonding
- 1x/2x Fiber Channel
- Remote controls
- Point-to-point networking
