TB5T1DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TB5T1 |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 40mA |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Interface Standard | GENERAL PURPOSE |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 5.5 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.008A |
| Out Swing-Min | 0.7 V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TB5T1DW Overview
This LED driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package for driving common LEDs.The Tube package houses this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver uses 4.5V~5.5V for power supply.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.With the part number TB5T1 identifying the product type, temperature, package, etc., you can search with it to see more variants.Wide receiver with enhanced power dissipation control, 16-pin.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.2 drivers are embedded on the integrator circuit.
TB5T1DW Features
Tube package
16 pin count
16 pins
5V power supply
TB5T1DW Applications
There are a lot of Texas Instruments TB5T1DW Drivers/Receivers/Transceivers applications.
- Bar, KTV wireless entertainment
- Switches
- IP cameras
- Data center
- Wireless communication
- Laser diode bonding
- Car radio
- Televisions
- Wireless projection application for conferences
- interconnection between switches
