TB6562ANG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-SDIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Supplier Device Package | 24-SDIP |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 10V~34V |
| Base Part Number | TB6562A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 40V |
| Interface | Parallel |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 12mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.5A |
| Max Output Voltage | 34V |
| Logic Function | AND |
| Voltage - Load | 10V~34V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TB6562ANG Overview
The design includes a package of type [0].The part is packged with 24-SDIP (0.300, 7.62mm) case.In general, it is recommended that the part be mounted by Through Hole.I believe it is suitable for the component connected to General Purpose.10V~34V volts can be supplied by the device.In terms of operating temperature, it falls within the range -20°C~85°C TA.In this case, the voltage can be applied to the load at the rate of 10V~34V.There is a recommended mounting method of Through Hole.The output current should remain at 1.5A.According to the TB6562Apart number, the part is found.24pins are used in its design.Drivers controllers is possible to access 4outputs.At [0], the output voltage is maintained.Controller ic reaches 85°Cat the maximum operating temperature.Ideally, the operating temperature should be higher than -20°C.Controller ic has the capacController icy to apply the device wController ich a maximum supply voltage of 34V.In addition to working at a voltage of 10V, it is capable of working at high voltages as well.
TB6562ANG Features
Applications : General Purpose
Load voltage across the chip 10V~34V
base on TB6562A number
designed with 4 outputs
TB6562ANG Applications
There are a lot of Toshiba Semiconductor and Storage TB6562ANG motor drivers applications.
- Monitoring the energy that the luminaire uses
- Arena lighting
- Hospitality buildings
- Commercial office
- Landscape lighting
- General lighting
- Large format LED backlighting
- Digital still cameras
- Dome
- Outdoor area lights
