TB67S142HG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 25-SIP Formed Leads |
| Number of Pins | 25 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 3.2W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 84V |
| Operating Supply Voltage | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 2.5mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Logic Function | AND |
| Voltage - Load | 10V~40V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height Seated (Max) | 19.37mm |
| Length | 28.8mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
TB67S142HG Overview
The package contains [0].This part is packed in a 25-SIP Formed Leads case.The part should be mounted by Through Hole.The component connected in General Purposeis compatible with it.There is a capability for the device to provide 4.75V~5.25V volts.This device operates at a temperature range of -20°C~85°C TA.This part has 25termination options.Drivers controllers is possible to apply voltage at a rate of 10V~40Vto the load.In order to get the best performance from this amplifier, it should be run at 5V.The recommended mounting method is Through Hole.The output current should remain at 3A.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.There are 25 pins on it.Drivers controllers operates from a voltage of 5.25V volts.The output voltage is maintained at 84V.This device operates on 2.5mAsupply current.In this case, the frequency is 100kHz.
TB67S142HG Features
Applications : General Purpose
Load voltage across the chip 10V~40V
TB67S142HG Applications
There are a lot of Toshiba Semiconductor and Storage TB67S142HG motor drivers applications.
- Tunnel lights
- Large outdoor LED display
- Landscape lighting
- parking lights
- Home lighting systems
- High brightness LED lighting
- drivers for outdoor application
- Arena lighting
- Indicator circuit
- Alternative to HID lights
