TC110301ECTTR
| Parameters | |
|---|---|
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 2V~10V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 2V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 115kHz |
| Duty Cycle (Max) | 92% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC110 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
TC110301ECTTR Overview
It comes in the SC-74A, SOT-753 package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2V~10V. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 100kHz~300kHz position. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Enable, Soft Start for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 5 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 3V. TC110 can be searched for other relevant dc to dc converter ics. There are a total of 5 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 2V. Based on the test statistics, DC regulator outputs voltage 3V. In most cases, the output current of the dc dc regulator will be 300mA, so note that when you start the project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator's maximum frequency is 115kHz. As a result, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLE so that the need can be met more directly. It is suggested that users apply 10V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
TC110301ECTTR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
TC110301ECTTR Applications
There are a lot of Microchip Technology TC110301ECTTR DC to DC converter applications.
- Medical equipment
- Shearing machines
- Motor controller circuits
- Radio equipment
- Smoke exhaust equipment
- Power supplies of electronic gadgets
- PSRR circuits
- Computer monitoring equipment of building
- Digital display device
- Emergency lighting monitoring equipment
