TC110303ECTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC110 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 2V~10V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 2V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 345kHz |
| Duty Cycle (Max) | 92% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TC110303ECTTR Overview
Capsuled in the SC-74A, SOT-753 package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. A 2V~10V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. This switching controller can switch at 100kHz~300kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Enable, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 5 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 3V is input. You can find other relevant dc to dc converter ics by searching "TC110". There are 5 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. The minimum input voltage of the dc dc voltage regulator should be 2V. DC regulator outputs 3V voltage based on test statistics. normally, the dc dc regulator's output current is 300mA, which you should keep in mind when starting a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator345kHz has the maximum frequency. The value of DC to DC voltage regulator is set at PFM CONTROL TECHNIQUE IS ALSO POSSIBLE in order to fulfill the requirements more effectively. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 10V.
TC110303ECTTR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
TC110303ECTTR Applications
There are a lot of Microchip Technology TC110303ECTTR DC to DC converter applications.
- SMT equipment
- Balance equipment
- Solar power plants
- Series voltage regulation circuits
- Packaging
- Smoke prevention equipment
- Medical monitoring systems
- Window air conditioners
- Remotely powered electric motors
- Constant current circuits
