TC110331ECTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC110 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 2V~10V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 2V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 115kHz |
| Duty Cycle (Max) | 92% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TC110331ECTTR Overview
Capsuled in the SC-74A, SOT-753 package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. A 2V~10V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~85°C TA dc switcher before. The switching controller is capable of switching at the 100kHz~300kHz position. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. 5 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 3.3V. Searching "TC110" will return other relevant dc to dc converter ics. In total, switching converter has 5 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator should be 2V. According to the test statistics, DC regulator outputs 3.3V voltage. In most cases, the dc dc regulator's output current is 300mA. This information should be noted when you begin working with the component. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 115kHz for this dc regulators. As a result, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLE so that the need can be met more directly. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 10V.
TC110331ECTTR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
TC110331ECTTR Applications
There are a lot of Microchip Technology TC110331ECTTR DC to DC converter applications.
- Household control circuits
- Nuclear power plants
- Communication system
- Various precision measuring instruments
- Printing equipment
- Network technology
- Die casting equipment
- Hydro power
- Scientific testing
- Magnetohydrodynamic power
