TC110501ECTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC110 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 2V~10V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 2V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 115kHz |
| Duty Cycle (Max) | 92% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TC110501ECTTR Overview
In the SC-74A, SOT-753 package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 2V~10V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. There is a switch at 100kHz~300kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 5 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Search for "TC110" to find other relevant dc to dc converter ics. 5 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 2V. As determined by the test statistics, the output voltage of DC regulator is 5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 300mA. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 115kHz. For better satisfaction, the value of DC to DC voltage regulator is PFM CONTROL TECHNIQUE IS ALSO POSSIBLE. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 10V.
TC110501ECTTR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
TC110501ECTTR Applications
There are a lot of Microchip Technology TC110501ECTTR DC to DC converter applications.
- Smoke prevention equipment
- Adjustable voltage or current linear circuits
- Plate bending machines
- Access control systems
- Series voltage regulation circuits
- Digital display device
- Surface processing equipment
- Overvoltage protection circuits in TV sets
- Low output voltage switching power supply circuits
- Handheld GPS
