TC110503ECTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC110 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 2V~10V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 2V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 345kHz |
| Duty Cycle (Max) | 92% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TC110503ECTTR Overview
It comes in the SC-74A, SOT-753 package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 2V~10V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 100kHz~300kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 5 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. Search for "TC110" to find other relevant dc to dc converter ics. 5 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 2V. Test statistics indicate DC regulator outputs 5V voltage. In most cases, the dc dc regulator's output current is 300mA. This information should be noted when you begin working with the component. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 345kHz for this dc regulators. In order to satisfy the need, DC to DC voltage regulator has a value of PFM CONTROL TECHNIQUE IS ALSO POSSIBLE. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 10V.
TC110503ECTTR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
TC110503ECTTR Applications
There are a lot of Microchip Technology TC110503ECTTR DC to DC converter applications.
- Arc suppression circuits
- Electric water heaters
- Electrical distribution systems
- Sensitive electronic devices
- Computer monitoring equipment of building
- Product testing
- Planers
- Servo drive system
- Radio equipment
- Medical equipment
