banner_page

TC1232EPA

5V8 Terminals 8-Pin TC1232 Voltage supervisor1 Channels Min 4V Max 5.5V


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-TC1232EPA
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 927
  • Description: 5V8 Terminals 8-Pin TC1232 Voltage supervisor1 Channels Min 4V Max 5.5V (Kg)

Details

Tags

Parameters
Nominal Supply Current 200μA
Max Supply Current 200μA
Adjustable Threshold YES
Quiescent Current 50μA
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.37V 4.62V
Number of Voltages Monitored 1
Reset Timeout 250ms Minimum
Undervoltage Threshold 4.25V
Overvoltage Threshold 4.49V
Height 4.06mm
Length 10.16mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1998
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number TC1232
Output Open Drain or Open Collector
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Operating Supply Current 200μA

TC1232EPA Overview


Power management is mounted through 8 terminals. In terms of packaging, power management follows the Tube model. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. The pins of the power management system count 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Through Hole mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 200μA. It is always advisable to use TC1232, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 200μA can be used with this power management.

TC1232EPA Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 4V
200μA operating supply current

TC1232EPA Applications


There are a lot of Microchip Technology TC1232EPA Voltage Supervisors applications.

  • Military electronics
  • Cloud computing
  • Electronics installed in the vehicle
  • DVR
  • Power distribution systems of ICU
  • Telecommunications equipment
  • Consumer electronics
  • Personal computers
  • Medical-specific insulation monitor
  • Digitally controlled LDO regulators circuit

Write a review

Note: HTML is not translated!
    Bad           Good