TC1270ANRVRCTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1270AN |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 7μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.72V |
| Max Reset Threshold Voltage | 2.82V |
| Undervoltage Threshold | 2.72V |
| Overvoltage Threshold | 2.82V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1270ANRVRCTR Overview
A total of 4 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of TO-253-4, TO-253AA functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The power management belongs to the Power Management Circuits subcategory. There are a total of 4 pins on power management. There are 4 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 10μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to TC1270AN, which is the base power ics number. The power management must be powered by 3V volts to function properly.
TC1270ANRVRCTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
TC1270ANRVRCTR Applications
There are a lot of Microchip Technology TC1270ANRVRCTR Voltage Supervisors applications.
- Detection of phase imbalance
- Military communications
- Stable power system
- Personal computers
- Military electronics
- Magnetic resonance imaging
- Data storage applications
- Electrical fire monitoring system
- DVR
- FPGA design
