Parameters |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC1270AN |
Output |
Open Drain or Open Collector |
Pin Count |
5 |
Power Supplies |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
10μA |
Adjustable Threshold |
NO |
Quiescent Current |
7μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.93V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
2.88V |
Max Reset Threshold Voltage |
2.98V |
Undervoltage Threshold |
2.88V |
Overvoltage Threshold |
2.98V |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2018 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
TC1270ANSVCTTR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 5 pins. This power management has 5 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 10μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to TC1270AN, which is the base power ics number. There is a requirement for 3.3V power to power this power management.
TC1270ANSVCTTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
TC1270ANSVCTTR Applications
There are a lot of Microchip Technology TC1270ANSVCTTR Voltage Supervisors applications.
- Multi-voltage system
- Embedded computing
- Precision measurement
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Detection of phase imbalance
- Automotive power systems
- WiFi router
- Radio
- emergency room