TC1271AMVRCTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1271A |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 7μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.3V |
| Max Reset Threshold Voltage | 4.46V |
| Undervoltage Threshold | 4.3V |
| Overvoltage Threshold | 4.46V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TC1271AMVRCTR Overview
There are 4 terminals connected to this power management, which makes it easy to mount. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-253-4, TO-253AA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. 4 pins are present in total in this power management. This power management system has 4 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 10μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TC1271A, which is the base power ics number. In order to operate this power management, it requires 5V volts of power.
TC1271AMVRCTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
TC1271AMVRCTR Applications
There are a lot of Microchip Technology TC1271AMVRCTR Voltage Supervisors applications.
- Smartphones
- Important electronics for automotive protection
- DC stabilized power supply module
- Dash board
- Unattended substation automation
- Insulation fault location system
- Multi-voltage system
- Military communications
- Telecommunications equipment
- Efficient information transmission
