TC1271ARVRCTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1271A |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 7μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.68V |
| Undervoltage Threshold | 2.58V |
| Overvoltage Threshold | 2.68V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TC1271ARVRCTR Overview
It is mounted through 4 terminals on the power management. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-253-4, TO-253AA functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 4 pins on the board. Pin count of the power management is 4. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 10μA supply current present in the power management. You can always use TC1271A, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 3V volts of power.
TC1271ARVRCTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
TC1271ARVRCTR Applications
There are a lot of Microchip Technology TC1271ARVRCTR Voltage Supervisors applications.
- Network equipment
- Analog circuit
- Unattended substation automation
- Leakage protection
- Power distribution systems of CCU
- Leakage current detection
- Important electronics for automotive safety
- Detection of phase imbalance
- Precision measurement
- Detection of phase sequence
