TC1410EOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1410 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Input Type | Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 45 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1410EOA Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tube is the form of the package.A total of 1 drivers are integrated into its configuration.There is a mounting bracket in the way of Surface Mount.By using 4.5V~16V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.Under its base part number TC1410, various related parts can be found.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 16V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 500mA can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has a total of 8 component pins.In terms of its basis, there are 2 outputs integrated.According to its maximum power dissipation, 470mW is capable of conducting and transferring a large amount of power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1mA.
TC1410EOA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1410EOA Applications
There are a lot of Microchip Technology TC1410EOA gate drivers applications.
- High-speed communications
- Commercial and agricultural vehicles (CAV)
- Industrial Power Supplies
- RGB applications
- Automotive Applications
- Solar power supplies
- Smart Phones
- Portable computers
- Motor Controls
- Motor Drives
