TC1410NCOA
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1410N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
TC1410NCOA Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Configuration is supported by 1 drivers.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4.5V~16V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of 0°C~150°C TJ.A type of Non-Inverting is used for input in this program.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number TC1410N.You mount it with Surface Mount.There are 8 pins available in the device.The device is specifically designed to operate at 16V volts.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is an output current limit of 500mA for this device.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has 8 component pins.For its basis, 2 outputs are integrated.This device has a maximum power dissipation of 470mW, indicating that it is capable of reducing power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 1mA to ensure greater stabilMosfet gate driversy.
TC1410NCOA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1410NCOA Applications
There are a lot of Microchip Technology TC1410NCOA gate drivers applications.
- Active filtering
- RGB applications
- High-voltage isolated DC-DC converters
- UPS systems
- Motor controllers
- PCMCIA applications
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- Dual-Battery Systems
- Automotive Applications
