TC1410NCOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1410N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1410NCOA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tape & Reel (TR).Gate drivers is configured wGate driversh 1 drivers.It's mounted on the way to Surface Mount.When the supply voltage is set to 4.5V~16V, it can demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.For this device, the temperature range is 0°C~150°C TJ.The input type is Non-Inverting.Initially, the configuration is composed of 8 terminations.The base part number TC1410N refers to a number of related parts.You mount it with Surface Mount.A total of 8 pins are available on the device.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is an output current limit of 500mA for this device.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The component has 8 pins.Mosfet driver is based on a basis of 2 outputs that have been integrated.470mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended that you keep the supply current at 1mA in order to achieve greater stabilMosfet gate driversy.
TC1410NCOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1410NCOA713 Applications
There are a lot of Microchip Technology TC1410NCOA713 gate drivers applications.
- Industrial Power Supplies
- serial peripheral interface (SPI), I2C
- Telecom switch mode power supplies
- Multicolor LED/laser displays
- Motor Drives
- Automotive Applications
- Pulse transformer drivers
- Isolated Gate Driver Supplies
- Power factor correction (PFC) circuits
- Portable computers
