TC1410NCPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 28Ohm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 730mW |
| Voltage - Supply | 4.5V~16V |
| Base Part Number | TC1410N |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height | 3.68mm |
| Length | 9.78mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1410NCPA Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A packaging method of Tube is used.There are 1 drivers installed for this device.Ideally, it should be mounted in the direction of Through Hole.In the absence of a power supply voltage of 4.5V~16V V, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.The allowable temperature range that this device can be operated in is 0°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC1410N.Mosfet driver is mounted using the Through Hole method.At the time of design, it is configured with 8 pins.Mosfet driver is possible for the output current to be as low as 500mA.The basis of this system consists of 1 outputs.Mosfet gate drivers is permissible to operate at a temperature of 70°C.Mosfet gate drivers is permissible to operate at a temperature of 0°C.According to its maximum power dissipation, 730mW is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 1mA.16V is its maximum operating voltage.A supply voltage of 4.5V is the minimum value required to operate the device.Mosfet gate drivers operates wMosfet gate driversh a resistance of 28Ohm.For operation, mosfet gate drivers has 1 channels.
TC1410NCPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 28Ohm
TC1410NCPA Applications
There are a lot of Microchip Technology TC1410NCPA gate drivers applications.
- Automotive Applications
- Motor Controls
- Refrigerator
- AC-DC Inverters
- Pulse transformer drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- LCD/LCoS/DLP portable and embedded pico projectors
- UPS systems
- PCMCIA applications
- Motor Control
