TC1410NEOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1410N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1410NEOA713 Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.Configuration is supported by 1 drivers.Surface Mount is the way in which it is mounted.By using 4.5V~16V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is the input type used in this program.Initially, the configuration is composed of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC1410N.The device is mounted with Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 500mA.There are various useful electronic components in its subcategory MOSFET Drivers.On the board, there are 8 component pins.The basis of this model has 2 outputs integrated.Considering its maximum power dissipation, 470mW shows its maximum capacity to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 1mA.
TC1410NEOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1410NEOA713 Applications
There are a lot of Microchip Technology TC1410NEOA713 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Power factor correction (PFC) circuits
- Head-up and Head mounted displays
- Broadcast equipment
- Motor Controls
- DC-DC Converters
- PCMCIA applications
- DC/DC converters
- Industrial Motor Inverter - Power Tools, Robotics
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
