TC1410NEPA
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Base Part Number | TC1410N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TC1410NEPA Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A packaging method of Tube is used.Configuration is supported by 1 drivers.Gate drivers is mounted in the way of Through Hole.In the absence of a 4.5V~16V supply voltage, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver is based on 8 terminations.Under its base part number TC1410N, various related parts can be found.Mosfet driver is mounted using the Through Hole method.During design, it is configured with 8 pins.A supply voltage of 16V is required for operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is an output current limit of 500mA for this device.Several electronic components are included in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.The basis has 2 integrated outputs.According to its maximum power dissipation, 730mW is capable of conducting and transferring a large amount of power without overheating.If you want a stable supply current, you should keep it at 1mA.
TC1410NEPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1410NEPA Applications
There are a lot of Microchip Technology TC1410NEPA gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Dual-Battery Systems
- Solar power supplies
- Motor controllers
- Active filtering
- Digitally controlled power supplies
- Refrigerator
- Uninterruptible Power Supplies (UPS)
- Power factor correction (PFC) circuits
- Video amplifiers
