Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
340mW |
Technology |
CMOS |
Voltage - Supply |
4.5V~16V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC1410N |
Pin Count |
8 |
Number of Outputs |
2 |
Max Output Current |
500mA |
Nominal Supply Current |
1mA |
Power Dissipation |
340mW |
Max Supply Current |
1mA |
Propagation Delay |
40 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 ns |
Rise Time |
35ns |
Fall Time (Typ) |
35 ns |
Rise / Fall Time (Typ) |
25ns 25ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Single |
Number of Drivers |
1 |
Turn On Time |
0.045 μs |
Output Peak Current Limit-Nom |
0.5A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
500mA 500mA |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2V |
Turn Off Time |
0.045 μs |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC1410NEUA Overview
For greater flexibility, its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is used.There is a package in the form of Tube.The configuration is supported by 1 drivers.Surface Mount is mounted in the way.Using a 4.5V~16V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 8 terminations.There are various related parts under its base part number TC1410N.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 8 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 500mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has a total of 8 component pins.Mosfet driver is based on a basis of 2 outputs that have been integrated.Based on its maximum power dissipation of 340mW, it is clear that it is capable of transferring and conducting power loss without overheating.To increase stability, keep the supply current at 1mA.
TC1410NEUA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1410NEUA Applications
There are a lot of Microchip Technology TC1410NEUA gate drivers applications.
- A/D drivers
- Motor Drives
- High frequency line drivers
- Active filtering
- Industrial motor drives - compact, standard, premium, servo drives
- Industrial Modules
- UPS systems
- Isolated Supplies for controller area network (CAN),
- DC-DC Converters
- High-speed communications