TC1411EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1411 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Propagation Delay | 40 ns |
| Input Type | Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411EOA713 Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is configured wGate driversh 1 drivers.Gate drivers is mounted in the way of Surface Mount.By using 4.5V~16V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting is used as the input type.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number TC1411, various related parts can be found.Mounting the device requires Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver is designed specifically to run on 16V volts of power.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 1A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.There are 8 component pins on the board.Considering its maximum power dissipation, 470mW shows its maximum capacity to transfer and conduct power loss without overheating.
TC1411EOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1411EOA713 Applications
There are a lot of Microchip Technology TC1411EOA713 gate drivers applications.
- AC-DC Inverters
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- Smart Phones
- Video amplifiers
- Industrial motor drives - compact, standard, premium, servo drives
- Industrial Power Supplies
- Portable computers
- Digitally controlled power supplies
- Active filtering
