TC1411EUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1411 |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 340mW |
| Propagation Delay | 40 ns |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411EUA713 Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package offers greater flexibility.A packaging method of Tape & Reel (TR) is indicated.The configuration is supported by 1 drivers.Surface Mount is the way in which it is mounted.A supply voltage of 4.5V~16V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting is the input type used in this program.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC1411.In this case, Surface Mount indicates how the device is to be mounted.When the device is designed, it has 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 16V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 1A can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.The component has 8 pins.Based on its maximum power dissipation of 340mW, it is clear that it is capable of transferring and conducting power loss without overheating.
TC1411EUA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1411EUA713 Applications
There are a lot of Microchip Technology TC1411EUA713 gate drivers applications.
- A/D drivers
- Uninterruptible Power Supplies (UPS)
- Commercial and agricultural vehicles (CAV)
- Industrial Motor Inverter - Power Tools, Robotics
- Active Clamp Flyback or Forward and Synchronous Rectifier
- serial peripheral interface (SPI), I2C
- Motor Control
- High frequency line drivers
- Dual-Battery Systems
- Refrigerator
