TC1411NCOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1411N |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NCOA713 Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) is the packaging method.Configuration is based on 1 drivers.Surface Mount is mounted in the way.When the supply voltage is 4.5V~16V it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of 0°C~150°C TJ.This program uses the input type of Non-Inverting.Initially, the configuration is composed of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC1411N.In this case, Surface Mount indicates how the device is mounted.The pins are configured with 8 when designing the chip.A supply voltage of 16V is required for operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.The maximum output current can amount to 1A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.Its maximum power dissipation of 470mW shows its power loss capacity without overheating.
TC1411NCOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1411NCOA713 Applications
There are a lot of Microchip Technology TC1411NCOA713 gate drivers applications.
- Topologies
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- Portable Navigation Devices
- Industrial Motor Inverter - Power Tools, Robotics
- A/D drivers
- Isolated Gate Driver Supplies
- High-speed communications
- Isolated switch mode power supplies (SMPS)
- General Purpose 3-Phase Inverter
