TC1411NCPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1411N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NCPA Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A packaging method of Tube is indicated.Ideally, it should be mounted in the direction of Through Hole.Using a 4.5V~16V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of N-Channel, P-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is 0°C~150°C TJ.The input type for this program is Non-Inverting.Initially, the configuration is composed of 8 terminations.There are numerous related parts listed under its base part number TC1411N.The device is mounted using Through Hole.There are 8 pins available in the device.The device is specifically designed to function with a supply voltage of 16V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 1A can be achieved at maximum power.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board contains 8 pins for component connections.Mosfet driver is based on a basis of 1 outputs that have been integrated.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.
TC1411NCPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1411NCPA Applications
There are a lot of Microchip Technology TC1411NCPA gate drivers applications.
- High power buffers
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated switch mode power supplies (SMPS)
- Uninterruptible Power Supplies (UPS)
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for Motor Control
- Portable Navigation Devices
- LCD/LCoS/DLP portable and embedded pico projectors
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
